SPEED
MAKE_MECH_PROP_CASE_022.f90 File Reference

Go to the source code of this file.

Functions/Subroutines

subroutine make_mech_prop_case_022 (rho, lambda, mu, gamma, qs, qp, xs, ys, zs, depth, zs_all, vs30, thickness, sub_tag_all)
 Makes not-honoring technique.
 

Function/Subroutine Documentation

◆ make_mech_prop_case_022()

subroutine make_mech_prop_case_022 ( real*8, intent(out)  rho,
real*8, intent(out)  lambda,
real*8, intent(out)  mu,
real*8, intent(out)  gamma,
real*8, intent(out)  qs,
real*8, intent(out)  qp,
real*8, intent(in)  xs,
real*8, intent(in)  ys,
real*8, intent(in)  zs,
real*8, intent(in)  depth,
real*8, intent(in)  zs_all,
real*8, intent(in)  vs30,
real*8, intent(in)  thickness,
integer*4  sub_tag_all 
)

Makes not-honoring technique.

Mechanical properties given node by node.

Definition at line 24 of file MAKE_MECH_PROP_CASE_022.f90.

27
28 real*8, intent(out) :: rho, lambda, mu, gamma, qs, qp
29 real*8, intent(in) :: xs, ys, zs, depth, zs_all,&
30 vs30, thickness
31 integer*4 :: sub_tag_all
32 real*8 :: ni, vs, vp, depth_real
33
34 rho = 0.d0;
35 lambda = 0.d0;
36 mu = 0.d0;
37 gamma = 0.d0;
38 qs = 0.d0;
39 qp = 0.d0
40
41 if ((depth .ge. 0.0d0).and.(zs_all .ge. 0.0d0)) then
42 ! ! + MATERIAL INSIDE THE BASIN
43 !! NEWER VS-RULE
44 if (depth .le. 150) then
45 vs = 281.64 + (2.0000*(548.33-281.64))/(1.0000+(15.0000/(depth+0.1000))**1.2900)
46 else
47 vs = 975
48 endif
49 vp = 1.855 * vs
50 rho = 1900 + vs / 1700 * 600
51 lambda = rho * (vp**2 - 2*vs**2)
52 mu = rho * vs**2
53 qs = 50
54 gamma = (3.1415*(2/3))/qs
55
56 else
57 ! + MATERIAL INSIDE THE BEDROCK - FIRST LAYER OF CRUSTAL MODEL
58 ! Depth_real = zs
59 vs = 1700
60 vp = 3160
61 rho = 2500
62 lambda = rho * (vp**2 - 2*vs**2)
63 mu = rho * vs**2
64 qs = 200
65 gamma = (3.1415*(2/3))/qs
66 endif
67
68
69
70

Referenced by make_eltensor_for_cases().

Here is the caller graph for this function: