SPEED
Functions/Subroutines
MAKE_MECH_PROP_CASE_007.f90 File Reference

Go to the source code of this file.

Functions/Subroutines

subroutine make_mech_prop_case_007 (rho, lambda, mu, gamma, qs, qp, xs, ys, zs, depth, zs_all, vs30, thickness, sub_tag_all)
 Makes not-honoring technique.
 

Function/Subroutine Documentation

◆ make_mech_prop_case_007()

subroutine make_mech_prop_case_007 ( real*8, intent(out)  rho,
real*8, intent(out)  lambda,
real*8, intent(out)  mu,
real*8, intent(out)  gamma,
real*8, intent(out)  qs,
real*8, intent(out)  qp,
real*8, intent(in)  xs,
real*8, intent(in)  ys,
real*8, intent(in)  zs,
real*8, intent(in)  depth,
real*8, intent(in)  zs_all,
real*8, intent(in)  vs30,
real*8, intent(in)  thickness,
integer*4  sub_tag_all 
)

Makes not-honoring technique.

Mechanical properties given node by node.

Definition at line 23 of file MAKE_MECH_PROP_CASE_007.f90.

26
27 real*8, intent(out) :: rho, lambda, mu, gamma, qs, qp
28 real*8, intent(in) :: xs, ys, zs, depth, zs_all,&
29 vs30, thickness
30 integer*4 :: sub_tag_all
31 real*8 :: ni, vs, vp, depth_real
32
33 rho = 0.d0;
34 lambda = 0.d0;
35 mu = 0.d0;
36 gamma = 0.d0;
37 qs = 0.d0;
38 qp = 0.d0
39
40
41 if ((depth .ge. 0.0d0) .and. (zs_all .ge. 0.0d0)) then
42 ! Option #1
43 vs = 300.0d0 + 36.0d0*(depth)**0.43 !VS: S velocity in m/s
44 vp = sqrt(4.57)*vs !VP: P velocity in m/s (nu = 0.36)
45 rho = 1900.0d0 !RHO: MASS DENSITY in kg/m^3
46 lambda = rho * (vp**2 - 2*vs**2)
47 mu = rho * vs**2
48 gamma = 6.9813e-02 ! (Qs=Vs/10=30)
49 else
50 ! + MATERIAL INSIDE THE BEDROCK (Vs=1700m/s)
51 lambda = 1.0514e+10
52 mu = 7.2250e+09
53 rho = 2500.0d0
54 gamma = 2.0944e-02
55 endif
56

Referenced by make_eltensor_for_cases().

Here is the caller graph for this function: