SPEED
Functions/Subroutines
MAKE_MECH_PROP_CASE_003.f90 File Reference

Go to the source code of this file.

Functions/Subroutines

subroutine make_mech_prop_case_003 (rho, lambda, mu, gamma, qs, qp, xs, ys, zs, depth, zs_all, vs30, thickness, sub_tag_all)
 Makes not-honoring technique.
 

Function/Subroutine Documentation

◆ make_mech_prop_case_003()

subroutine make_mech_prop_case_003 ( real*8, intent(out)  rho,
real*8, intent(out)  lambda,
real*8, intent(out)  mu,
real*8, intent(out)  gamma,
real*8, intent(out)  qs,
real*8, intent(out)  qp,
real*8, intent(in)  xs,
real*8, intent(in)  ys,
real*8, intent(in)  zs,
real*8, intent(in)  depth,
real*8, intent(in)  zs_all,
real*8, intent(in)  vs30,
real*8, intent(in)  thickness,
integer*4  sub_tag_all 
)

Makes not-honoring technique.

Mechanical properties given node by node.

Definition at line 23 of file MAKE_MECH_PROP_CASE_003.f90.

26
27 real*8, intent(out) :: rho, lambda, mu, gamma, qs, qp
28 real*8, intent(in) :: xs, ys, zs, depth, zs_all,&
29 vs30, thickness
30 integer*4 :: sub_tag_all
31 real*8 :: ni, vs, vp, depth_real
32
33 rho = 0.d0;
34 lambda = 0.d0;
35 mu = 0.d0;
36 gamma = 0.d0;
37 qs = 0.d0;
38 qp = 0.d0
39
40 if ((depth .ge. 0.0d0) .and. (zs_all .ge. 0.0d0)) then
41 vs = 250.0 + 30.0 * sqrt(depth) !VS: S velocity in m/s
42 vp = 1000.0 + 30.0 * sqrt(depth) !VP: P velocity in m/s
43 rho = 1900.0 !RHO: MASS DENSITY in kg/m^3
44 lambda = rho * (vp**2 - 2*vs**2)
45 mu = rho * vs**2
46 gamma = 6.2832e-02
47 else
48 !+ MATERIAL INTO THE BEDROCK (FIRST LAYER)
49 lambda = 1.2694e+10
50 mu = 7.1280e+09
51 rho = 2200.0
52 gamma = 3.9270e-02
53 endif
54
55

Referenced by make_eltensor_for_cases().

Here is the caller graph for this function: